Description

The Encoder 2 Ethernet (E2E) FIZ Pro is a compact but powerful lens metadata box for virtual production and VFX!

Top Level Specs

• 3 axis FIZ data with lens encoders or serial data
• Cooke /i and Zeiss XD protocol supported (ENG lens and Preston support coming soon)
• Sends data via OpenTrackIO or OSC over Ethernet or WiFi
• Genlock and timecode sync

Overview

1. OLED DIsplay
2. Genlock and Timecode ports
   • Mini BNC connectors, trilevel and bilevel genlock supported
3. Interface joystick
4. Lens Serial Data Port
   • 4-pin 0B LEMO for lens data
5. DC Power Input
   • Arri-standard 2-pin LEMO power, 8-30VDC range
6. Ethernet port
7. Focus/Iris/Zoom Encoder ports
   1. Locking USB C connectors, supports ProMark and Indiemark 3 encoders
8. Accessory Port
   1. General purpose USB port, used for accessories

Physical Setup

A mounting plate is provided with the E2E FIZ Pro. It is attached with 4x M4 bolts and can be removed for size/weight purposes. 4x 1/4-20 anti-twist holes are provided for mounting.

Power is provided via the 2-pin LEMO connector, which uses the standard Arri pinout. The E2E FIZ Pro does not support PoE.

A mounting plate is provided with the E2E FIZ Pro. It is attached with 4x M4 bolts and can be removed for size/weight purposes. 4x 1/4-20 anti-twist holes are provided for mounting.

Power is provided via the 2-pin LEMO connector, which uses the standard Arri pinout. The E2E FIZ Pro does not support PoE.

<aside> 💡

The internal WiFi antenna is located under the front faceplate. For best signal strength, do not cover the faceplate,

</aside>

Physical Connections

Lens Encoders

3x Indiemark 3 or ProMark lens encoders can be connected via the locking USB-C ports. Any USB type C cable can be used.

The X port can be used as a general purpose power output, up to 0.5 amps of power can be drawn from this port.

Lens Serial